Engineering, 12.02.2021 01:40 LittlestRedTeal8940

A cone clutch with cone angle 20° is to transmit 7.5 kW at 750 c. p.m. The normal intensity of pressure between the contact faces is not to exceed 0.12 N/mm2. The coefficient of friction is 0.2. If face width
is Yth of mean diameter, find : 1. the main dimensions of the clutch, and 2. axial force required
while running.
[Ans. R = 117 mm : b = 46.8 mm : r1 = 125 mm : r2 = 109 mm : 1395 N]

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

You know the right answer?

A cone clutch with cone angle 20° is to transmit 7.5 kW at 750 c. p.m. The normal intensity of press...