Engineering, 11.02.2021 17:30 elijahdouglass00

A dc-to-dc converter (found in most laptop computers) has an input terminal pair that is connected to a battery and an output terminal pair that is connected to an unknown bounded load resistance. The converter is called a boost converter if the output voltage is larger than the input voltage. It is called buck converter under opposite conditions. Either way, one hopes for a high-efficiency conversion process in which the ratio of output to input power is not far below unity. An inefficient converter would quickly drain the battery. Show how you would connect two voltmeters and two ammeters to measure the converter efficiency with minimal error over several decades of load current.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, DestyHilBan1183

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

You know the right answer?

A dc-to-dc converter (found in most laptop computers) has an input terminal pair that is connected t...