![subject](/tpl/images/cats/User.png)
Engineering, 01.02.2021 22:30 kittylover613
An advanced spatial disorientation trainer allows the cab to rotate aroundmultiple axes, as well as to extend inward and outward. It can be used tosimulate driving, fixed-wing aircraft flying, and helicopter maneuvering. In one training scenario, the trainer rotates and translates in the horizontal plane, where the location of the pilot is defined by the relationshipsr = 10 + 2 cos(_π3 t) and θ = 0.1(2t2− t), where r, θ, and t are expressedin feet, radians, and seconds, respectively. Knowing that the pilot has aweight of 175 lbs,
(a) determine the magnitude of the resulting force acting on the pilot at t = 5 s,
(b) plot the magnitudes of the radial and transverse components of the force exerted on the pilot from 0 to 10 seconds.
![ansver](/tpl/images/cats/User.png)
Answers: 3
![](/tpl/images/ask_question.png)
![](/tpl/images/ask_question_mob.png)
Other questions on the subject: Engineering
![image](/tpl/images/cats/User.png)
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, bckyanne3
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
An advanced spatial disorientation trainer allows the cab to rotate aroundmultiple axes, as well as...
Questions in other subjects:
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/en.png)
English, 23.06.2019 09:10
![Konu](/tpl/images/cats/fizika.png)
![Konu](/tpl/images/cats/mkx.png)
![Konu](/tpl/images/cats/es.png)
Spanish, 23.06.2019 09:10
![Konu](/tpl/images/cats/mat.png)
Mathematics, 23.06.2019 09:10
![Konu](/tpl/images/cats/istoriya.png)
![Konu](/tpl/images/cats/es.png)
![Konu](/tpl/images/cats/en.png)