using a 3 inch diameter conduit a 90 degree stub up with a 30 inch radius with a 48 inch and inch leg. Find the developed length thergain the overall length and the amount of 6 degree segment the 90 degrees to make the up

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.