Engineering, 25.01.2021 08:30 monacelli21212owlrlu

Problem #3: Bending moments and shear forces are shown below for a beam that is part of an ordinary moment frame in an office building. Determine the governing bending moments at the
ends and at mid-span as well as the governing shear forces at the ends using the LRFD Load
Combinations in ASCE 7. Assume the live load on the floor is less than 100 psf.
At the ends of the beam:
Mp=-57.6K-1
M = -22.5k-ft
Mw = +54.Ok-ft
At mid-span of the beam:
Mp= +41.1k-
M1 = +16.2k-
Mw=0.0k-ft
At the ends of the beam:
Vo = +11.8kip
V< = +4.6kip
Vw = +4.8kip

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

You know the right answer?

Problem #3: Bending moments and shear forces are shown below for a beam that is part of an ordinary...