Engineering, 21.01.2021 18:30 famouzgal

The Processor X, released in 2004, had a clock rate of 3.7 GHz and a supply voltage of 1.25 V. Assume that, on average, it consumed 10 W of static power and 90 W of dynamic power. The Processor Y, released in 2012, had
a clock rate of 3.5 GHz and a supply voltage of 0.9 V. Assume that, on average, it consumed 30 W of static power
and 40 W of dynamic power.
a) For each processor find the average capacitive loads. The unit of capacitive load is called Farad (F).
b) For each processor, if the total dissipated power is to be reduced by 10%, how much should the voltage be
reduced to maintain the same leakage current?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, qwertylol12345

Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.

Answers: 2

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 19:20, holaadios222lol

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

continue

Engineering, 04.07.2019 19:20, lovenahofer

Apreheater involves the use of condensing steam at 100°c on the inside of a bank of tubes to heat air that enters at 1 atm and 25°c. the air moves at 5 m/s in cross flow over the tubes. each tube is 1 m long and has an outside diameter of 10 mm. what is the minimum value of nl needed to achieve an outlet temperature of t 75 c? what is the corresponding pressure drop across the tube bank?

Answers: 3

continue

You know the right answer?

The Processor X, released in 2004, had a clock rate of 3.7 GHz and a supply voltage of 1.25 V. Assum...