Engineering, 19.01.2021 14:00 kkjones1536

A composite plane wall consists of a 5-in.-thick layer of insulation (ks = 0.029 Btu/hft°R) and a 0.75-in.-thick layer of siding (ks = 0.058 Btu/hft°R). The inner temperature of the insulation is 67°F. The outer temperature of the siding is -8°F. Determine at steady state:

(a) the temperature at the interface of the two layers, in °F, and (b) the rate of heat transfer through the wall in Btu/h*ft^2 of surface area.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

You know the right answer?

A composite plane wall consists of a 5-in.-thick layer of insulation (ks = 0.029 Btu/h*ft*°R) and a...