Various amplifier and load combinations are measured as listed below using rms values. For each, find the voltage, current, and power gains (Av, Ai, and Ap, respectively) both as ratios and in dB: a. Vi= 100mV; i=100μA ; vo =10V ; RL= 100Ω
b. Vi= 10μV; i=100nA ; vo =1V ; RL= 10kΩ
c. Vi= 1V; i=1mA ; vo =5V ; RL= 10Ω

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges