Engineering, 18.01.2021 14:00 madmatt873

Suppose your bathroom sink is clogged and you have decided to try and unclog it by pushing a wire into the drain. You have several types of wire available around the house, some insulated and some not. Which of the following wire characteristics would you need to consider in selecting a wire for the job? The wire characteristics are listed as follows:

a. Immunity to electrical noise
b. Color of the insulation
c. Resistance of the insulation to salt water
d. Resistance of the insulation to fire
e. Cost
f. Stiffness
g. Ease of stripping the insulation -
h. Weight
i. Availability
j. Strength
k. Resistance to high temperatures
l. Resistance to stretching

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Fahaddie

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

continue

Engineering, 04.07.2019 18:20, miguel454545

Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.

Answers: 1

continue

Engineering, 04.07.2019 19:10, justkevin1231

Which of the following is the most important advantage of a large field of view? a. allows larger areas to be examined b. relieves eyestrain c. minimizes parallax errors. d. increases precision in proportion to the in- crease in field of view

Answers: 2

continue

Engineering, 04.07.2019 19:10, nhester3401

Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.

Answers: 2

continue

You know the right answer?

Suppose your bathroom sink is clogged and you have decided to try and unclog it by pushing a wire in...