Engineering, 17.01.2021 23:40 qmsadler01
Daniel would like to test a composite insulation he has made. He uses a heat box that will heat 7 kg of air. The specific heat of air is 1000 J/kgC. He records the temperature inside the box at the start to be 58C, the box heats to maximum temperature to be 99C, and then cools to a final temperature of 73C. Determine the energy gained by the air in the box during heating – Q(heat) in J (Joules).
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 18:20, RiverH246
Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.
Answers: 1
Engineering, 04.07.2019 19:10, kelseiroll9759
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
You know the right answer?
Daniel would like to test a composite insulation he has made. He uses a heat box that will heat 7 kg...
Questions in other subjects:
Mathematics, 19.12.2019 03:31
