Engineering, 14.01.2021 16:50 bvallinab

IF YOUR VEHICLE BREAKS DOWN, YOU SHOULD?

Answers: 1

Show answers

Answers

Answer from: michneidredep7427

1. TURN ON YOUR HAZARD/EMERGENCY LIGHTS

Turn on your hazard lights to warn other drivers as soon as you sense something's wrong. Keep them on until help arrives, recommends the National Motorists Association (NMA).

2. SLOW DOWN AND PULL OFF THE ROAD

Aim for the right shoulder of the road. Consumer reports recommends that you pull over to a safe, flat location that is as far away from moving traffic as possible.

3. TURN YOUR WHEELS AWAY FROM THE ROAD AND PUT ON THE EMERGENCY BRAKE

The California Department of Motor Vehicles (DMV) recommends pulling your emergency brake, sometimes called the parking brake. If you have to park on a hill or slope, turn the car's wheels away from the road to help prevent the care from rolling into traffic, says the California DMV.

4. STAY IN YOUR VEHICLE

If you're on a highway or crowded road, the Insurance Information Institute (III) recommends that you avoid getting out of your vehicle to look at the damage or fix a mechanical problem. If you need to get out of the car, get your vehicle to a safe place and make sure the road around you is completely clear. If you're stopped on the right-hand side of the road, get out through the passenger-side door.

5. BE VISIBLE

Once you're safely out of the vehicle, prop up your hood to let other drivers know they should proceed with caution. This will alert other drivers that you're broken down, according to the NMA.

6. SET UP FLARES OR TRIANGLES

Place flares or triangles with reflectors behind your car to alert other drivers to the location where you've stopped, says the III.

7. CALL FOR HELP

Call or use an app to get a tow truck, mechanic or roadside assistance to come help. your insurance company or other provider who may be able to help. If you're in an emergency situation or are not sure who to contact, call 911 or the local police for help.

Hope this helps :)

Answer from: Quest

answer:

look in settings

explanation:

Answer from: Quest

Ireally wish i could but i will do some research and when i find the answer i will come back to assist you ; )

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, krystabrewer3

What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information

Answers: 3

continue

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, krojas015

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

continue

Engineering, 04.07.2019 18:20, cxttiemsp021

Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.