Sides of the transformer,
b) A 220 V dc shunt motor having an armature resistance of 0.25 ohm
...
Engineering, 01.01.2021 19:10 ghwolf4p0m7x0
Sides of the transformer,
b) A 220 V dc shunt motor having an armature resistance of 0.25 ohm
carries an armature current of 50 A and runs at 600 rpm. If the flux is
reduced by 10% by field regulator, find the speed assuming load
torque remains the same
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10, anna22684
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Questions in other subjects:
English, 09.11.2020 09:30
Geography, 09.11.2020 09:30
Spanish, 09.11.2020 09:30
Chemistry, 09.11.2020 09:30
Mathematics, 09.11.2020 09:30
