Engineering, 30.12.2020 07:20 jordanmazer17

You are driving on a multi-lane road, and are following the vehicle in front of you at a safe distance. But then a car changes lanes into the gap in front of you, and slows down because the gap in front o them is too small. You should A. Honk your horn, and then gradually drop back further behind the slowing car.

B. Quickly try to change lanes, and pass the slowing car if you can.

C. Slow down and drop back to a safe following distance behind the slowing car.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

Engineering, 06.07.2019 03:10, liliauedt

Explain the strain-hardening phenomenon on the basis of dislocation - dislocation strain field interactions. also, briefly describe what generally happens to the ductility of a metal that has been strain hardened (i. e. does strain hardening make a metal more ductile or

Answers: 3

continue

Engineering, 06.07.2019 03:10, serenad2

Different between boring and turning?

Answers: 1

continue

You know the right answer?

You are driving on a multi-lane road, and are following the vehicle in front of you at a safe distan...