Engineering, 25.12.2020 19:20 LunaSpellman

For the given Common Emitter NPN Amplifier, the transistor made of Germanium diodes, βDC=80,VCC = 16 volts, R1= 62 KΩ, R2= 9.1 KΩ, RC= 3.9 KΩ, RE= 0.68 KΩ.

a) Name the type of biasing used in the above circuit?

b) Find VE?

c) Find VCE?

d) Find VC?

e) What is the name of the capacitors C1, C3and C2?

For the given Common Emitter NPN Amplifier,

the transistor made of Germanium diodes, βDC=80,VCC =

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, margaret1758

If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.

Answers: 1

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, viicborella

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

You know the right answer?

For the given Common Emitter NPN Amplifier, the transistor made of Germanium diodes, βDC=80,VCC = 1...