Engineering, 23.12.2020 04:50 18jweeks9
How many LEED points are possible in the Indoor Environmental Quality category for each of the following situations: A garage is not constructed A fireplace is not installed A shoe removal and storage space is near the primary entryway, separated from living areas without conventional carpet At least 90% of the site-applied paints and coatings, flooring, insulation, and site-applied adhesives and sealants have been tested and meet the requirements of CA Section 01350
Answers: 3
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
How many LEED points are possible in the Indoor Environmental Quality category for each of the follo...
Mathematics, 07.05.2020 11:58