subject
Engineering, 21.12.2020 14:00 tyler9585

After learning all about the long and complex journey that a seed takes to go from the field to storage (or even to the dinner table) you are going to take all of this newfound knowledge to create a visual representation of this journey! Start by reviewing the journey that a seed goes on from field to storage and make a list highlighting all of the key stops along this journey. Next, either on paper by hand or digitally, you will create a drawing of some kind of winding road…it does not need to be a magnificent work of art; it only needs to express the idea of a winding road for metaphorical purposes. If you do decide to do this digitally, you may need to use several slides or several pages on whatever program you use to make the “road” long enough to include all of the steps along a seed’s journey. Once you have drawn your “road,” either digitally or by hand, you will be adding facts, info, and images to make a mural-type, visually informative illustration of the road a seed takes! For each step along a seeds journey, you will need to include a brief description, any correlating facts, and an image. You should space out the steps appropriately along the road and make sure they go in the correct order. Write START at the place on your road where a seeds journey begins and END where it ends to make sure that this is clear. Feel free to infuse this activity with your own creativity in whatever way you see fit—just make sure that all of the information is there. A couple of “winding road” examples:

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
image
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
image
Engineering, 04.07.2019 19:20, brae72
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
image
Engineering, 06.07.2019 03:10, cchotshot
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg. a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg. m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 1
You know the right answer?
After learning all about the long and complex journey that a seed takes to go from the field to stor...

Questions in other subjects:

Konu
Mathematics, 05.05.2020 15:58