Engineering, 10.12.2020 18:50 shelovejaylocs
Select the correct answer from each drop-down menu.
How does Marie control the action of a robot using a servo motor?
Marie is operating a robot that is fitted with a servo motor. When she sets a desired position for the servo motor, it willuntil she issues the next command. Until then, the servo motor will.
For the first box, the options are
Hold the position
Reverse direction
Move clockwise
For the second box, the options are
Continue moving clockwise
Continue moving counter-clockwise
Resist all outside forces that move it
Answers: 3
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Select the correct answer from each drop-down menu.
How does Marie control the action of a robot us...
Chemistry, 02.03.2021 04:50
Health, 02.03.2021 04:50
Mathematics, 02.03.2021 05:00
Biology, 02.03.2021 05:00