Engineering, 02.12.2020 03:40 alyssahockett4

PEOPRO 1. A cooler is required to cool 0 5 kg's of oil from 50°C to 30°C with a cooling
water inlet temperature of 10% and a mass flow rate of 0.375 kg's Calculate the
heat exchanger surface area required if the cooler is connected
a. Using a counter flow arrangement
6. Using a parallel flow arrangement
Use the Overall heat transfer coefficient 70 W/mK
Specific heat capacity of oil - 1400 JkEK
Specific heat capacity of water 4200 kgk or J/kg °C

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, niicoleassssssf

Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86

Answers: 2

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

You know the right answer?

PEOPRO 1. A cooler is required to cool 0 5 kg's of oil from 50°C to 30°C with a cooling
water...