Engineering, 01.12.2020 07:50 leo4687

3. A steel pipe of outside diameter 20 mm and thickness 3 mm is deflected by 3 mm when used as a beam supported at its ends, 1
m apart, and subjected to a central load of 170 N. Find the
buckling load when the pipe is used as a column with hinged
ends. What is the maximum lateral deflection of this column
before the material attains the yield stress of 250N/mm??

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 03.07.2019 19:30, 10040813

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

continue

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

You know the right answer?

3. A steel pipe of outside diameter 20 mm and thickness 3 mm is deflected by 3 mm when used as a b...