Engineering, 29.11.2020 14:20 mettababeeeee
Laminar flow normally persists on a smooth flat plate until a critical Reynolds number value is reached. However, the flow can be tripped to a turbulent state by adding roughness to the leading edge of the plate. For a particular situation, experimental results show that the local heat transfer coefficients for laminar and turbulent conditions are
h_lam(x)= 1.74 W/m^1.5. Kx^-0.5
h_turb(x)= 3.98 W/m^1.8 Kx^-0.2
Calculate the average heat transfer coefficients for laminar and turbulent conditions for plates of length L = 0.1 m and 1 m.
Answers: 1
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10, wyattlb97
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Laminar flow normally persists on a smooth flat plate until a critical Reynolds number value is reac...
Computers and Technology, 28.01.2021 03:40
Social Studies, 28.01.2021 03:40
Mathematics, 28.01.2021 03:40
Mathematics, 28.01.2021 03:40