Engineering, 28.11.2020 14:00 leo4687

A planar steam-water heat exchanger is on a 1.5 m2 heating surface and consists of a 5 mm thick copper plate (k=390 kcal/mhK) and an 8 mm thick nickel plate (k=70 kcal/MHK) adjacent to it. On the side of the copper plate there is steam at a temperature of 3200C, and limestone was formed due to deposits in the Steam. Due to Limestone, there is an additional thermal resistance of 0.005 m2hK/kcal against heat transfer. On the nickel side, there is water at a temperature of 400C. Heat transfer coefficients on the Steam and water side are 7000 and 600 kcal/m2hk. a) find the amount of heat passing, surface temperatures and intermediate temperatures Dec.
b) what would be the amount of heat passing if it wasn't for Limestone? In this case, what is the percentage of heat loss due to Limestone?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:20, AnonymousLizard52303

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

continue

You know the right answer?

A planar steam-water heat exchanger is on a 1.5 m2 heating surface and consists of a 5 mm thick copp...