Engineering, 26.11.2020 04:10 yvettegonzalez3390yg

In an upsetting process of a 304 Stainless Steel specimen of 200 mm in diameter and 150 mm height in an open die forging to a reduction of height 40%. If the
coefficient of friction is 0.2 and the yield strength of the material is 300 MPa,
Calculate the force required for the process at the end of the stroke.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 04.07.2019 12:10, Ryantimes2

On a average work day more than work place firs are reorted

Answers: 1

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 06.07.2019 03:30, neariah24

Give three differences between corrosion of metals and the corrosion of ceramics? what is static fatigue?

Answers: 1

continue

You know the right answer?

In an upsetting process of a 304 Stainless Steel specimen of 200 mm in diameter and 150 mm height i...