A) A ground radar system is being used to track a missile after launch. The missile is flying straight up at 1,458 m/s and an altitude of 45,219 meters. The value of theta measured by radar is currently 138 degrees. What is the current value for r_dot? Give the numerical answer corresponding to m/s. b) what is the value of theta_dot? (the rate of change of theta)

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.