subject
Engineering, 12.11.2020 19:10 jfefeferf

Write the method is PreviousIndex, which will receive two parameters. The first one is an array of integer numbers, and the other one is an integer value as an index. The method should return a true boolean value only if the number at the index received as the second parameter appears in a previous element than the index received as second parameter). It should return false otherwise. As an example, if the array received was the following: int[] numbers - (3, 4, 5, 6, 7, 8, 4, 6, 2, 7, 8, 9, 1, 2, 2, , 7, 7); With an integer 6 as the index. It should return true given that the number 4 is also at index 1. However, if the number received as index was 1 it should return false, since the value 4 does not appear at any Index previous than 1. In other words, the index O in that array is not the same as the one in the index 1. Note that you only need to code the method, not all the program.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
image
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
image
Engineering, 04.07.2019 18:10, dval1146
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
image
Engineering, 04.07.2019 18:10, 0436500
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Write the method is PreviousIndex, which will receive two parameters. The first one is an array of i...

Questions in other subjects:

Konu
Mathematics, 24.11.2020 03:50
Konu
Mathematics, 24.11.2020 03:50