subject
Engineering, 12.11.2020 17:50 nylahnwalker

1. In an internal combustion engine, fuel is burned the engine.
2. In the
stroke of the four-stroke cycle, the piston rises, compressing the air-and-
fuel mixture trapped in the combustion chamber.
3. In an engine, the stroke is the distance the piston
4. When a piston is at its lowest position in the cylinder, it's said to be at
5. During the
stage of engine operation, gases are released from the cylinder.
6. A four-stroke engine will contain at least two mechanical valves called the
valve
and the
valve
7. In the
stroke of the four-stroke cycle, air mixed with fuel is drawn into the
cylinder.
8. The total engine
I is stated as the volume of the space swept through by all the
pistons.
9.
A two-stroke engine completes all four stages of engine operation in four piston
strokes
10. During the
stroke of the four-stroke cycle, the mixture of air and fuel is ignited,
and the contained explosion of the fuel presses the piston back down in the cylinder.
11. The top of a cylinder is sealed by the cylinder
12. The
is the ratio of the total cylinder volume to the clearance volume.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
image
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
image
Engineering, 04.07.2019 19:20, rida10309
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
You know the right answer?
1. In an internal combustion engine, fuel is burned the engine.
2. In the
stroke of the...

Questions in other subjects: