PLS HELP THIS IS A MAJOR TEST DUE BY 1:00 PlS PLS PLS
...
Engineering, 10.11.2020 22:10 ginareyes0423
PLS HELP THIS IS A MAJOR TEST DUE BY 1:00 PlS PLS PLS
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 19:20, brae72
Asimple speed reducer is composed of 2 spur gears. the pinion gear has a pitch diameter of 0.75" and 36 teeth while the driven gear has a pitch diameter of 4.0" and 192 teeth. a)-what is the diametral pitch of each gear? b)-if an electric motor rotating ccw at 3000 rpm is coupled to the pinion, what is the rotational speed of the driven gear? c)-if the torque delivered to the pinion is 1 n-m, what is the torque on the driven gear? d)-what is the power transmitted by the gear train?
Answers: 1
Engineering, 06.07.2019 04:10, mooneyhope24
Ir at sea level and 30°c and 50% relative humidity flows at a rate of 1 kg/s through a cooling coil that has an apparatus dewpoint of 10°c. the air leaves the coil at 15°c. determine the following: 3.1)- relative humidity of the air leaving the coil; 3.2)- moisture content of the air leaving the coil; 3.3)- sensible heat factor; 3.4)- total heat transfer rate; 3.5)- sensible heat transfer rate 3.6)- latent heat transfer rate
Answers: 1
Engineering, 06.07.2019 04:10, idjfjcjs584
Along steel shaft of 10 cm diameter is austenised at 870°c and then quenched in a liquid at 30oc. the average surface heat transfer coefficient is 2000 w/m2. °c. the relevant thermophysical properties of the shaft are: p=7800 kg/m", k=20 w/mk, cp=0.46 kj/kg. k calculate: a)-the time required for the center temperature to drop to 200°c. b)-the temperature at half-radius at that moment. c)-the amount of heat that had been transferred to the liquid by that time per meter length of the shaft
Answers: 1
You know the right answer?
Questions in other subjects:
Mathematics, 13.07.2019 11:30
Mathematics, 13.07.2019 11:30
Mathematics, 13.07.2019 11:30
Mathematics, 13.07.2019 11:30
Biology, 13.07.2019 11:30
