subject
Engineering, 07.11.2020 20:30 kaitlyn114433

PLEASE HELP (Its due today pls help) I will give 40 points 1.
What is the amperage rating of an electrical device that uses 12 kilowatts of electricity when operated for 6 hours in a 120-volt circuit?

2.
How many watts will be used in 16 hours if an electric motor requires 5.5 amperes of electricity, and is on a 120 volt electrical circuit 10 hours?

3.
An agricultural mechanics shop has five 120 watt lights, a 700-watt saw and a 120-watt fan that were used for 6 hours. How many KILOWATTS of electricity were used?

4.
What is the amperage of a circuit with ten 100 watt light bulbs in a 120-volt circuit?

5.
If electricity costs $0.12 per kilowatt hour, how much does it cost to operate a router which requires 12 amperes of electricity and is used in a 120 volt electrical circuit for 4 hours?

6.
If the local rate for electricity is $.11 per kilowatt hour, how much should the electric bill be for 240 kilowatt hours?

7.
If the local rate for electricity is $0.07 per kilowatt hour, how much does it cost to operate an electric motor requiring 25 amperes of electricity if used in a 120 volt circuit for one hour?

8.
What is the watt rating of a portable electric drill with 40 amps and 120 volts?

9.
How many watts of current does an electric motor which requires 10 amperes of electricity and is designed to be used in a 120 volt electrical circuit use in one hour?

10.
How many kilowatts of current does a portable saw that requires 12 amperes of electricity and is designed to be used in a 120-volt electrical circuit use in one hour?

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, makaylashrout77
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
image
Engineering, 04.07.2019 12:10, Ryantimes2
On a average work day more than work place firs are reorted
Answers: 1
image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
You know the right answer?
PLEASE HELP (Its due today pls help) I will give 40 points 1.
What is the amperage rating of...

Questions in other subjects: