A cathode ray tube is made of glass with a small amount of some kind of gas in it. It has metal electrodes at each end to pick up an electric current. The electrodes are named "positive” and "negative,” which were words used by Benjamin Franklin in the 1700s to describe electricity. A bright ray forms in the gas when an electric current is applied to metal electrodes. In the 1800s, an important scientist suspected that the negatively charged particles in a cathode ray were present in all atoms. What procedure would allow that scientist to investigate this idea?
observing if the cathode ray forms when the electric current is off
making cathode ray tubes out of different materials to see if the ray is the same
using different magnets to see if the cathode ray responds in the same way to each
changing the strength of the electric current and observe how the ray forms and changes

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?