Engineering, 03.11.2020 21:50 briannaroberson16

1: Determine the dynamic pressure of water received at the site described below.

Water Tower holds water at an elevation of 265 feet

Site is at an elevation of 145 feet

The water supply system uses cast iron pipes.

The water travels through 3.2 miles of pipes before reaching the site

The pipe has a diameter of 8 inches

The water travels through 9 90-degree bends, 4 Branch tees, and 1 Swing Check Valve

The water has a flow rate of 105 gpm

Round to the hundredths place (2 places after the decimal)

2:
What is the static head of a water supply system if the water tower holds water at and elevation of 462 feet and the site that uses the water is at an elevation of 294 feet?
Answer value

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, mm016281

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit. explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:20, mjcbs21

What is the heat treatment of metals? what is the benefit of it? why and how it's useful? answer in details, do not write by hand.

Answers: 3

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

You know the right answer?

1: Determine the dynamic pressure of water received at the site described below.

Water...