Engineering, 30.10.2020 16:40 dreannaevans2

The route sheet for a part is given as follows: A-E-C-B-A-C. One thousand pieces will flow through from the first machine A to the final machine C following the given sequence. A unit load size of 50 is initially specified at the first machine and doubled after machine B. If one vehicle is used to transport the unit loads from machine to machine, determine the minimum number of trips that the vehicle has to make, assuming that the vehicle capacity is one unit load

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:10, ijohnh14

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

continue

Engineering, 04.07.2019 18:10, oliviasoreo92

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

continue

You know the right answer?

The route sheet for a part is given as follows: A-E-C-B-A-C. One thousand pieces will flow through f...