subject
Engineering, 30.10.2020 16:20 tae8002001

What power can be provided from a turbine fed by a water pipe when the initial water pressure upstream of the turbine is 150 kPa, the pressure downstream of the turbine is 101 kPa, the pipe area upstream of the turbine is 1.5 m2 , the pipe area downstream of the turbine is 2.5 m2 , and the volumetric flow rate is 6 m3 /s? Assume no friction. Provide your answer in kW. [Ws = 325 kW]]

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
image
Engineering, 04.07.2019 16:10, Arealbot
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
image
Engineering, 04.07.2019 18:10, johnthienann58
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
image
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
You know the right answer?
What power can be provided from a turbine fed by a water pipe when the initial water pressure upstre...

Questions in other subjects: