Engineering, 28.10.2020 16:10 10040816

Air enters a compressor operating at steady state with pressure of 1 atm, at a temperature of 350 K, and a volumetric flow rate of 0.6 m3/s. The air exits the compressor at a pressure of 6 atm. Heat transfer from the compressor to its surrounding occurs at a rate of 30 kJ/kg of air flowing. The compressor power input is 75 kW. Neglecting kinetic and potential energy effects and assuming air to be an ideal gas, please determine the exit temperature.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

Engineering, 04.07.2019 18:20, sanchez626

Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process

Answers: 1

continue

You know the right answer?

Air enters a compressor operating at steady state with pressure of 1 atm, at a temperature of 350 K,...