Engineering, 27.10.2020 02:10 mariahgriego4126

Match each scenario with the term it represents. As an engineer designs a new truck, he creates a model that has its sides unfolded so the client is able to see the front view through the center of the drawing.

Kelly has just completed a drawing of a model that allows the client to see the product in three dimensions with every axial view visible. This allows the client to envision the entire product.

John has been working on the design for a new video recorder. At this point he just needs to show the client a sketch of the recorder from the front so that all the functional buttons are visible.

Isometric

Third-angle projection

orthographic

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, bryneosburn

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

continue

Engineering, 04.07.2019 18:10, winterblanco

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

continue

Engineering, 04.07.2019 18:20, rjone8429

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

You know the right answer?

Match each scenario with the term it represents. As an engineer designs a new truck, he creates a m...