Engineering, 26.10.2020 07:00 starlodgb1971

102) To prepare for the alignment of numerous pumps, you need to have 50 pieces of 1/8-inch brass shim stock on hand. If you stack the 50 shims on top of each other,
how tall would the stack be, shown as a whole or mixed number? (Hint: You must also reduce any fraction that might remain to its lowest terms )
1
The stack of (50) 3-inch brass shims would measure inches in height.
and
Incorrect:
ower

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, Strick1530

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

continue

Engineering, 04.07.2019 19:10, moneyyfletcher

The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]

Answers: 3

continue

Engineering, 04.07.2019 19:20, molly7654

Brief discuss how the presence of dislocations in crystal structures can be an advantage and a disadvantage to engineer and designers.

Answers: 3

continue

You know the right answer?

102) To prepare for the alignment of numerous pumps, you need to have 50 pieces of 1/8-inch brass...