![subject](/tpl/images/cats/User.png)
Engineering, 21.10.2020 21:01 boxergirl9875
In your own words explain the difference between the impact driver and the drill?
![ansver](/tpl/images/cats/User.png)
Answers: 3
![](/tpl/images/ask_question.png)
![](/tpl/images/ask_question_mob.png)
Other questions on the subject: Engineering
![image](/tpl/images/cats/User.png)
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 19:10, gabigalvis1091
What is the main objective of using reheat rankine cycle?
Answers: 3
![image](/tpl/images/cats/User.png)
Engineering, 06.07.2019 04:20, hailiemanuel930
Steam enters a turbine at steady state at 2 mpa, 360°c with a velocity of 100 m/s. saturated vapor exits at 0.1 mpa and a velocity of 50 m/s. the elevation of the inlet is 3 m higher than at the exit. the mass flow rate of the steam is 15 kg/s, and the power developed is 7 mw. let g 9.81 m/s^2. determine: a)-the area at the inlet, in m^2 b)-the rate of heat transfer between the turbine and surroundings, in kw c)-draw a p-v diagram for this process.
Answers: 1
You know the right answer?
In your own words explain the difference between the impact driver and the drill?...
Questions in other subjects:
![Konu](/tpl/images/cats/fizika.png)
![Konu](/tpl/images/cats/obshestvoznanie.png)
Social Studies, 20.08.2019 21:20
![Konu](/tpl/images/cats/ekonomika.png)
![Konu](/tpl/images/cats/en.png)
English, 20.08.2019 21:20
![Konu](/tpl/images/cats/obshestvoznanie.png)
![Konu](/tpl/images/cats/ekonomika.png)
![Konu](/tpl/images/cats/informatica.png)
Computers and Technology, 20.08.2019 21:20
![Konu](/tpl/images/cats/informatica.png)
Computers and Technology, 20.08.2019 21:20
![Konu](/tpl/images/cats/informatica.png)
![Konu](/tpl/images/cats/informatica.png)
Computers and Technology, 20.08.2019 21:20