Engineering, 21.10.2020 17:01 alienxangg91

A copper sheet of thickness 2L= 2 mm has an initial temperature of Ti= 140°C. It is suddenly quenched in liquid water, resulting in boiling at its two surfaces. For boiling, Newton’s law of cooling is expressed as q ′′=h(Ts-Tsat), where Ts is the solid surface temperature and Tsat is the saturation temperature of the fluid (in this case Tsat= 100°C). The convection heat transfer coefficient may be expressed as h=1010W/m2⋅K3(T-Tsat)2. Determine the time needed for the sheet to reach a temperature of T= 102°C.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 03.07.2019 23:20, abbz13

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

continue

Engineering, 04.07.2019 18:10, yasminothman02

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

continue

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

You know the right answer?

A copper sheet of thickness 2L= 2 mm has an initial temperature of Ti= 140°C. It is suddenly quenche...