Engineering, 21.10.2020 15:01 alexis539
During a stress-strain test, the unit deformation at a stress of 35 MPa was observed to 0.00000167 m/m and at a stress of 140 MPa it was 0.00000667 m/m. If the proportional limit was 200 MPa, what is the strain corresponding to 80 MPa?
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, aliceohern
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20, samueltaye
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
You know the right answer?
During a stress-strain test, the unit deformation at a stress of 35 MPa was observed to 0.00000167 m...
Questions in other subjects:
Social Studies, 17.08.2020 03:01
Mathematics, 17.08.2020 03:01
Mathematics, 17.08.2020 04:01
