Engineering, 17.10.2020 21:01 andy18973

In an experiment, the temperature of a hot gas stream is to be measured by a thermocouple with a spherical junc-tion. Due to the nature of this experiment, the response time of the thermocouple to register 99 percent of the initial tem-perature difference must be within 5 s. The properties of the thermocouple junction are k = 35 W/m⋅K, rho = 8500 kg/ m 3 , and c p = 320J/kg⋅K. If the heat transfer coefficient between the thermocouple junction and the gas is 250 W/ m 2 ⋅K, deter-mine the diameter of the junction.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, namira16

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

continue

Engineering, 04.07.2019 18:10, jesuslovesusall3

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

continue

Engineering, 06.07.2019 02:30, khalilh1206

1in2 processor chip can be modelled as an isothermal plane wall of silicon, isothermal on both sides. the power input to the bottom of the plane wall, or the processing power of the chip, often called the thermal design power (tdp), is 100w. assume the periphery is adiabatic. the silicon is 400 microns thick. the temperature at the junction, or in this case on the bottom of the isothermal plane wall, is 85°c. what is the top surface temperature, assuming that the only mode of heat transfer is conduction

Answers: 1

continue

You know the right answer?

In an experiment, the temperature of a hot gas stream is to be measured by a thermocouple with a sph...