Engineering, 17.10.2020 19:01 kokokakahi

A solid sphere having a diameter d and specific weight Î³s is immersed in a liquid having a specific weight Î³f (Î³f > Î³s) and then released. It is desired to use a model system to determine the maximum height, h, above the liquid surface that the sphere will rise upon release from a depth H. It can be assumed that the important liquid properties are the density, Î³f/g, specific weight, Î³f, and viscosity, Î¼f Establish the model design conditions and the prediction equation, and determine whether the same liquid can be used in both the model and prototype systems.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 16:10, Arealbot

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

continue

Engineering, 04.07.2019 18:10, lowkeyqueenk

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

continue

Engineering, 04.07.2019 18:10, Tyrant4life

Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.

Answers: 1

continue

Engineering, 04.07.2019 18:10, chadatkin

Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)

Answers: 3

continue

You know the right answer?

A solid sphere having a diameter d and specific weight Î³s is immersed in a liquid having a specific...