subject
Engineering, 17.10.2020 19:01 kristygodwin

A fuel cell is an electrochemical device that reacts hydrogen with oxygen from the air to produce water and DC electricity. A proposed application is replacement of the gasoline-fueled internal combustion engine in an automobile with a 100 kW fuel cell. You are on a summer internship with a gas supplier planning to transport hydrogen to service stations for use in cars powered by fuel cells. The hydrogen is to be transported in tube trailers, each of which has 10 tubes of length 10.5 m and diameter 0.56 m. Hydrogen in the tubes at 2600 psig and an average temperature of 298 K is discharged at service stations to a final pressure of 55 psig. Refueling each fuel-cell-powered automobile is estimated to require 4.0 kg of hydrogen.

a) You and your office-mate—an intern from a different university—have been asked to estimate the number of automobiles that can be refueled by one tube-trailer load of hydrogen. He does a very quick calculation and comes up with a value of 95 cars. Speculate how he did it and provide support for your speculation. What was his mistake?

b) Do the calculation using the law of corresponding states instead. (remember that for hydrogen and helium adjusted critical temperature and pressure values should be used)

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
image
Engineering, 04.07.2019 18:10, dval1146
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
image
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
image
Engineering, 04.07.2019 19:10, phantomlizz3233
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
You know the right answer?
A fuel cell is an electrochemical device that reacts hydrogen with oxygen from the air to produce wa...

Questions in other subjects:

Konu
Mathematics, 31.03.2021 17:30
Konu
Mathematics, 31.03.2021 17:30