![subject](/tpl/images/cats/User.png)
Engineering, 16.10.2020 14:01 martinbricein10
Methanol is synthesized from carbon monoxide and hydrogen in a catalytic reactor. The fresh feed to the process contains 32.0 mole% CO, 64.0% H2, and 4.0% N2. This stream is mixed with a recycle stream in a ratio 5 mol recycle/1 mol fresh feed to produce the feed to the reactor, which contains 13.0 mole% N2. A low singlepass conversion is attained in the reactor. The reactor effluent goes to a condenser from which two streams emerge: a liquid product stream containing essentially all the methanol formed in the reactor, and a gas stream containing all the CO, H2, and N2 leaving the reactor. The gas stream is split into two fractions: one is removed from the process as a purge stream, and the other is the recycle stream that combines with the fresh feed to the reactor.
Required:
For a methanol production rate of 100 kmol/hr, calculate the fresh feed rate (kmol/hr), the molar flow rate and composition of the purge gas, and the overall and single-pass conversions.
![ansver](/tpl/images/cats/User.png)
Answers: 2
![](/tpl/images/ask_question.png)
![](/tpl/images/ask_question_mob.png)
Other questions on the subject: Engineering
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, skpdancer1605
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 18:10, QueenLife4869
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
![image](/tpl/images/cats/User.png)
![image](/tpl/images/cats/User.png)
Engineering, 04.07.2019 19:20, rida10309
At steady state, air at 200 kpa, 325 k, and mass flow rate of 0.5 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. the inlet cross-sectional area is 6 cm2. at the duct exit, the pressure of the air is 100 kpa and the velocity is 250 m/s. neglecting potential energy effects and modeling air as an 1.008 kj/kg k, determine ideal gas with constant cp = (a) the velocity of the air at the inlet, in m/s. (b) the temperature of the air at the exit, in k. (c) the exit cross-sectional area, in cm2
Answers: 2
You know the right answer?
Methanol is synthesized from carbon monoxide and hydrogen in a catalytic reactor. The fresh feed to...
Questions in other subjects:
![Konu](/tpl/images/cats/en.png)
English, 29.06.2020 18:01
![Konu](/tpl/images/cats/mat.png)
Mathematics, 29.06.2020 18:01
![Konu](/tpl/images/cats/himiya.png)
![Konu](/tpl/images/cats/User.png)
SAT, 29.06.2020 18:01
![Konu](/tpl/images/cats/mat.png)
![Konu](/tpl/images/cats/himiya.png)
Chemistry, 29.06.2020 18:01
![Konu](/tpl/images/cats/mat.png)
Mathematics, 29.06.2020 18:01
![Konu](/tpl/images/cats/es.png)
Spanish, 29.06.2020 18:01
![Konu](/tpl/images/cats/mat.png)
Mathematics, 29.06.2020 18:01
![Konu](/tpl/images/cats/health.png)
Medicine, 29.06.2020 18:01