subject
Engineering, 16.10.2020 20:01 josie122

A 100 ohm Class A RTD probe is calibrated at three points for extra precision, with a curve of where:

RTD (T)= RTD0 ((1 + AT+ BT^2 + CT^3 (T-100))

RTD (T) = the RTD element’s resistance in ohms at temperature T

RTD0 = the RTD element’s resistance in ohms at 0°C

T = the RTD element’s temperature in °C

A = 3.9083 x 10-3 /°C

B = -5.775 x 10-7 /°C2

C = 0 if T >= 0°C

IF RTD(T) = 114.65 ohms, what is T in °C? (Type in a one-decimal number)

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, volleyballfun24
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:10, chadatkin
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
image
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
You know the right answer?
A 100 ohm Class A RTD probe is calibrated at three points for extra precision, with a curve of wher...

Questions in other subjects:

Konu
Mathematics, 04.12.2020 02:50