subject
Engineering, 15.10.2020 08:01 mayamcmillan11

A stream of high pressure saturated liquid water at 100 bar and a flow rate of 5 kg/s enters an insulated pipe (D=10-inch) and passes through an insulated valve, which reduces its pressure to 10 bar and vaporizes a fraction of the liquid in this throttling process. Determine: a. The properties of the feed stream.
b. The specific enthalpy of the exit stream.
c. The temperature of the exit stream.
d. The fraction of vapor in the exit stream.
e. The specific volume of the exit stream.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
image
Engineering, 04.07.2019 18:20, AnonymousLizard52303
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
image
Engineering, 04.07.2019 19:10, kayleeemerson77
Analyze the factors that influence the choice between the following pairs of processes to make the products indicated: i) sand casting versus die casting of an electric-motor housing ii) thread rolling versus machining of a bolt for high-strength application. (co3/c5)
Answers: 3
image
Engineering, 06.07.2019 04:10, j015
Apinion having 30 involute teeth of 6,5 module rotates at 220 r/min and transmits 2 kw to a gear wheel having 70 teeth; the addendum on both wheels is 4 of the circular pitch and the angle of obliquity is 200. determine; 3.1 the lengths of the path of approach and the arc of approach 3.2 the normal force between the teeth at an instant when there is only one pair of teeth in contact
Answers: 2
You know the right answer?
A stream of high pressure saturated liquid water at 100 bar and a flow rate of 5 kg/s enters an insu...

Questions in other subjects:

Konu
Mathematics, 24.11.2020 21:10
Konu
Social Studies, 24.11.2020 21:10
Konu
Mathematics, 24.11.2020 21:10
Konu
Mathematics, 24.11.2020 21:10
Konu
Mathematics, 24.11.2020 21:10