subject
Engineering, 13.10.2020 04:01 evansh78

The popularity of orange juice, especially as a breakfast drink, makes it an important factor in the economy of orange-growing regions. Marketed juice has either gone through a process in which it was concentrated, or it may be a not-from-concentrate juice. Frozen concentrated juice is reconstituted before consumption. Although concentrated juices are less popular in the United States than at one time, they still have a major segment of the market. The approaches to concentrating orange juice include evaporation, freeze concentration, and reverse osmosis. Here we examine the evaporation process by focusing only on two constituents in the juice: solids and water. Fresh orange juice contains approximately 10.0 wt% solids (sugar, citric acid and other indigenous ingredients) and frozen concentrate contains approximately 45.0 wt% solids. The frozen concentrate is obtained by evaporating water from the fresh juice to produce a mixture that is approximately 67.0 wt% solids. However, so that the flavor of the concentrate will closely approximate that of fresh juice, the concentrate from the evaporator is blended with fresh orange juice (and other minor additives) to produce a final concentrate that is approximately 45.0 wt% solids. Assume a basis of 100.0 kg of fresh juice fed to the process. a) What is the mass of final concentrate produced?b) What is the fraction of fresh juice that bypasses the evaporator?

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 19:30, 10040813
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
image
Engineering, 04.07.2019 08:10, doggo242
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
image
Engineering, 04.07.2019 18:10, yasminothman02
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
The popularity of orange juice, especially as a breakfast drink, makes it an important factor in the...

Questions in other subjects:

Konu
Chemistry, 07.05.2021 22:20
Konu
Mathematics, 07.05.2021 22:20