Engineering, 13.10.2020 03:01 andreafletcher101

Q.4. Two thermocouples (temperature measurement devices) are tested by inserting their probes in boil- ing water, recording the readings, removing and drying the probes, and then doing it again. The results of five measurements are as follows: T(°C)-Thermocouple A | 72.4 | 73.1 | 72.6 72.8 | 73.0 T(C) Thermocouple B 973 1014 98.701100.4 (a) For each set of temperature readings, calculate the sample mean, the range, and the sample (b) Which thermocoupie readings exhibit the higher degree of scatter? Which thermocouple is more standard deviation. accurate?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, tjeffers90028

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:10, demarcuswiseman

Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.

Answers: 3

continue

Engineering, 04.07.2019 19:10, LadyHolmes67

Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false