Engineering, 11.10.2020 23:01 wadepoolio8836

Consider a bidirectional link that uses Go-Back-N with N = 7. Suppose that all frames are one unit long and that they use a time-out value of 2. Assume the propagation is 0.5 unit and the processing time is negligible. Assume that ACK (Acknowledgment) timer is one unit long. Assuming stations A and B begin with their sequence numbers set to zero, show the pattern of transmissions and associated state transitions for the following sequences of events (Explain with diagram)(a) Station A sends 6 frames in a row, starting at t = 0. All frames are received correctly. (Explain with diagram)(b) Station A sends 6 frames in a row, starting at t = 0. All frames are received correctly, except frame 3 is lost. (Explain with diagram)(c) Station A sends 6 frames in a row, starting at t = 0. Station B sends 6 frames in a row, starting at t =0.25. All frames are received correctly. (Explain with diagram)

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, koolgurl2003

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Answers: 1

continue

Engineering, 04.07.2019 18:10, settasav9641

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

You know the right answer?

Consider a bidirectional link that uses Go-Back-N with N = 7. Suppose that all frames are one unit l...