Engineering, 11.10.2020 23:01 drice517

3) A Cessna 172 is flying in a straight-and-level flight condition at an altitude of 1.21 km with a speed of 107 kph when suddenly a piece of equipment falls out of the aircraft. Before the equipment falls, the aircraft has a coefficient of lift of 1.18 (including the equipment). The piece of equipment that fell had a mass of 208 kg, the wing area of the aircraft is 16.2 m2, and the mean aerodynamic chord is 1.14 m. The viscosity of air at 1.21 km altitude is 1.69 x 10-5 Ns/m2. Find the coefficient of lift, coefficient of drag, and Reynold’s number after aircraft returns to a straight-and-level flight condition at the same altitude and the same speed as before. The backwards force on the aircraft at this condition is 241 N.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, 1230bering

Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives

Answers: 2

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Engineering, 04.07.2019 18:20, jessie8022

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.

Answers: 2

continue

Engineering, 04.07.2019 19:20, carterdaw

Aseries piping system conveys methyl alcohol. the system consists of 70 m of 1- nominal pipe follow by 50 m of 2-nominal pipe, both schedule 40 commercial steel. the 1-nominal pipe contains 3 90° elbows (regular) anda fully open gate valve, all threaded. the pressure drop through the system is 150 kpa. determine the volume flow rate through the system that is horizontally laid.

Answers: 1

continue

You know the right answer?

3) A Cessna 172 is flying in a straight-and-level flight condition at an altitude of 1.21 km with a...