Engineering, 11.10.2020 01:01 anastasialong

A 5000 lb-mole/hr feed containing 15% propane, 55% butane and the remainder pentane, is fed to a distillation tower. The reflux ratio is 10 to 1. The distillate to feed ratio (d/f) for propane is 0.99. The composition of the distillate is 29.3 % propane, 69.5% butane and 1.2 % pentane. Perform the following steps that would ultimately lead us to solve for the flowrates of all streams.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, johnthienann58

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

continue

You know the right answer?

A 5000 lb-mole/hr feed containing 15% propane, 55% butane and the remainder pentane, is fed to a dis...