Engineering, 30.09.2020 06:01 genyjoannerubiera
(Civil Rngineering, Concrete Reinforcement).
Design a T-beam for the floor system shown below. The span is simple and is 4.0 m, the service
applied moments are:
Md (dsad load) = 270kN. m
Ml (live load) = 575kN. m.
fc = 21MPa
fy = 420MPa.
Answers: 3
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10, ijohnh14
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10, oliviasoreo92
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
(Civil Rngineering, Concrete Reinforcement).
Design a T-beam for the floor system shown below. The...
Mathematics, 11.10.2019 02:30
Mathematics, 11.10.2019 02:30
History, 11.10.2019 02:30
English, 11.10.2019 02:30
Mathematics, 11.10.2019 02:30
History, 11.10.2019 02:30