subject
Engineering, 30.09.2020 06:01 btcastongia

Ex.4) Design a T-beam for the floor system shown below. The span is simple and is 4.0 m, the service
applied moments are Mo = 270kN. m and My = 575kN. m. fo = 21MPa and f, = 420MPa.
75 mm V
600 mm
1800 mm
375
1800 mm
375
1800 mm
375 1800 mm
>
k

|800 mm


Ex.4)

Design a T-beam for the floor system shown below. The span is simple and is 4.0 m, the serv

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 19:10, juneham
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
image
Engineering, 04.07.2019 19:20, ijohnh14
Apure substance is a)-mixture of various chemical elements or compounds b)-substance that has a fixed chemical composition throughout c)-mixture that is homogeneous (such as air) d)-all the answers
Answers: 3
image
Engineering, 04.07.2019 19:20, sashajayne8260
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
image
Engineering, 06.07.2019 03:20, loveuncondition
Not a characteristic property of ceramic material (a) high temperature stability (b) high mechanical strength (c) low elongation (d) low hardness
Answers: 2
You know the right answer?
Ex.4) Design a T-beam for the floor system shown below. The span is simple and is 4.0 m, the servic...

Questions in other subjects:

Konu
Chemistry, 15.04.2021 16:30